Estimate how much crushed granite your job needs. Choose a product, enter the area and depth, and we'll figure the tonnage and truck loads — then send it straight to a quote.
Depth is how thick the stone layer will be, not how deep you dig. A gravel drive is usually 4″ of stone; make it 6″ if trucks use it.
Tip: for a circular area, use the diameter for both length and width — the estimate runs slightly high, which leaves a little safety margin.
Estimate only — truck loads based on ~25-ton hauls. Final tonnage confirmed on certified scales.
Each gradation has its own typical unit weight, so the estimate adjusts to what you're actually ordering.
Length × width gives the area; depth in inches converts to feet automatically.
We return tons, cubic yards, and truck loads — ready to drop into a quote request.